The ANSYS suite of programs is installed on the Helium cluster. available on both Helium & Neon. Neon is only running Ansys version 14.5, while Helium offers both Ansys version 12.1 and 14.5.
To use them, you will need to have access to a license server that will validate your right to use the software. The license servers are not run on Helium so please check with your department for more information. Once you know how to access your license server, run the license setup program on Helium. This is a graphical program so you will have to have X11 forwarding enabled in your SSH session.
...
| Info |
|---|
...
| ||
Note that if you are not part of the IIHR investor group (which is selected by default), you will need to obtain the proper licesnse server information from your PI, and then export a variable before running the license manager. An example would look like:
|
...
Next, run this command to open the License depending on which Ansys version you want to use, run one of the following commands to open the License setup GUI:
for Ansys v14.5: /opt/ansys-14.5/shared_files/licensing/lic_admin/anslic_admin
for Ansys v12.1: /opt/ansys_inc/shared_files/licensing/lic_admin/anslic_admin
You will see a window that looks like this:
You should choose the button that says "Set License Preferences for User..." That will open an option to choose a version; please choose 12the correct version. 1. That will open a new window:
...
After that is set up then you can run your ANSYS programs with something like the following:
| Code Block | ||||
|---|---|---|---|---|
|
...
#!/bin/sh |
...
# |
...
#$ -N Job_Name |
...
#$ -cwd |
...
#$ -j y |
...
#$ -pe fluent 32 |
...
#$ -S /bin/bash |
...
/opt/ansys_inc/v121/fluent/bin/fluent 3ddp -t$NSLOTS -g -cnf=$TMPDIR/machines -sge -pinfiniband -mpi=openmpi -i File.in > File.out |
...
|
Again note that if you are are not part part of IIHR, you should have License Manager environment variables specified in your job script like below – be sure you are referencing the correct Ansys version's path, depending on your needs (below example uses 14.5):
| Code Block | ||||
|---|---|---|---|---|
|
#!/bin/sh |
...
# |
...
#$ -N Job_name |
...
#$ -cwd |
...
#$ -j y |
...
#$ -pe fluent 20 |
...
#$ -S /bin/bash |
...
#$ -l mf=2G |
...
export ANSYSLMD_LICENSE_FILE=1055@<server>.uiowa.edu |
...
export LM_LICENSE_FILE=1055@<server>.uiowa.edu |
...
/opt/ansys |
...
-14.5/v145/fluent/bin/fluent 3d -t$NSLOTS -g -cnf=$TMPDIR/machines -sge -pinfiniband -mpi=openmpi -i File.in >File.out |
...
...
|