...
Basic Job Submission
The Helium cluster uses Table of Contents
The HPC cluster system use the Sun Grid Engine (SGE) queue scheduler system. The feature of a queue scheduler system that users interact with the most is that of job submission. The manual pages for SGE are very good and should be referred to for details. For this particular topic the qsub manual page is the authoritative source.
| No Format |
|---|
man qsub |
This document provides a brief introduction to the most common options that might be used to submit jobs to the SGE system. It will focus on single processor jobs as that is the most basic case, but not necessarily the most common. Details on submission of parallel jobs is covered in in Advanced Job Submission.Anchor
Job Script
While it is possible to submit programs directly to the SGE system (using the -b option flag) it is generally preferable to create a job script. The job script is just like any other script that you write in terms of specifying commands that you would like to run. The difference is that instead of a user running the script, it is submitted to SGE and SGE then runs the script. It does so after determining what nodes are available for it to run on. In its simplest form, the job script is simply a call to the program that performs the calculation.
| Code Block | ||||
|---|---|---|---|---|
|
...
#!/bin/sh |
...
# This is a very simple example job script |
...
/Users/jdoe/my_program |
...
...
| Info |
|---|
The line ending string for text files created on Windows systems is different than that of Linux systems. It is best to create your scripts on the cluster but if you create them on a Windows machine and copy them then you will need to convert the line endings. Run the following on your script to convert it:
|
Submitting the job
To run the above program on the cluster it must first be submitted to SGE. This is done with the qsub command.
| No Format |
|---|
qsub myscript.job |
That will submit the job with all of the default options. For a parallel job, a parallel environment would need to be specified. This will be covered in more detail in in Advanced Job Submission but but an example would look like
| No Format |
|---|
qsub -pe |
...
smp 12 myscript.job |
The default queue is set to be the UI queue, which has a 25 running jobs per user limit. In addition, there is high memory queue (UI-HM) for large memory jobs. If you have many single processor jobs to run it would may be better to submit them to the all.q queue, which has no limit, but is subordinate /wiki/spaces/hpcdocs/pages/76513448 to the other queues.
| No Format |
|---|
qsub -q all.q myscript.job |
An alternative to specifying a qsub option on the command line is to put it into the job script. This is accomplished with the special prefix string of "#$" in the job script which siginifies signifies a qsub directive follows.
| Code Block | ||||
|---|---|---|---|---|
|
#!/bin/sh |
...
# This is an example script showing how to specify qsub options |
...
#$ -q all.q |
The "#$ -q all.q" line will look like a comment to the shell interpreter but will be passed as a qsub directive when the job script is submitted to interpreted by SGE. Any of the qsub options can be specified this way.
...
| Info |
|---|
If an option is specified on the command line it will supersede the specification in the job script file. |
...
Commonly Used Options
...
Commonly Used Options
The following are some common options for the qsub command. For information on other options for more complex submissions, check the man pages with the command "man qsub".
| qsub option | Description |
|---|---|
| -V | This imports your current environment to the job. This is set by default. As such, it does not have to be specified but is good to know about. |
| -N [name] | The name of the job. Make sure this makes sense to you. |
| -l h_rt=hr:min:sec | Maximum walltime for this job. You may want to specify this if you think your job may run out of control. |
| - |
| l h_vmem=bytes | You can specify a unit as well. For example, -l h_vmem=2G An appropriate value will be set for your job if an entire node is not requested. |
| -cwd | Determines whether the job will be executed from the current working directory. If not specified, the job will be run from |
| your home directory. | |
| -S | Specify the shell to use when |
| interpreting the job script. | |
| -e [path] | Name of a file or directory for standard error. |
| -o [path] | Name of a file or directory for standard output. |
| -j [y,n] | Merge the standard error stream into the standard output stream. |
| -pe [name] [n] | Parallel environment name and number of slots (cores). |
| -M email address | Set the email address to receive email about jobs. |
| Separate with comma if more than one is specified | |
| -m b|e|a|s|n,... | Specify when to send an email message 'b' Mail is sent at the beginning of the job. 'e' Mail is sent at the end of the job. 'a' Mail is sent when the job is aborted. 's' Mail is sent when the job is suspended. 'n' No mail is sent. |
|
...
|
Memory request
Memory request
If you need a certain amount of memory to be available for your computation to start, you can request that with a resource request.
To request a particular quantity of memory, use the option:
...
| Panel | ||
|---|---|---|
| ||
qsub -l mf=nG or qsub -l mf=nM |
...
|
|
Output Redirection
...
Output Redirection
It is often necessary or desired to redirect the standard output and standard error streams to files. This can be accomplished with the typical shell redirection calls but SGE also provides a mechanism for capturing the stdout and stderror stderr streams. By default, the standard error is written to a file named named $JOB_NAME.e$JOB_ID and and the standard output is written to a file called called $JOB_NAME.o$JOB_ID. These can be set via the -e and -o flags flags to qsub, respectively.
...
| Info |
|---|
The standard error stream can be merged into the standard output stream with the ' |
...
The standard error and output streams are appended to the respective files so reusing a file will not destroy the previous contents. Another handy way to use this facility is to specify a directory for the target standard error and output streams. This will create the error and output files with the default filenames in the specified directory.
...
| Note |
|---|
...
Shell redirection, ie.
will |
...
override the ' |
| Anchor |
|---|
...
|
...
|
An array job is a group of identical tasks that are differentiated only by an index number.
Each job in the array will inherit the same resource requests and attribute allocations as if they were entered independently as Batch Jobs. These jobs will be run concurrently, provided enough resources are available. Array jobs are created by adding the following option to the qsub command (or the #$ directive in the job script):
| No Format |
|---|
-t n[-m[:s]] |
Where n=the lowest index number, m=the highest index number, and s=the step size. m and s are optional, which means that you could enter a single number (n), a simple range (n-m), or a range with step size (n-m:s).
See Array Jobs for more information.
The index number can be referenced within the script with the variable SGE_TASK_ID. There must be something mapping to the index number to make this useful. So, for example, say there are a set of files named, input1, input2, input3, input4, input5, input6, input7, input8 and render.job contains the following:
Example referencing task ID
#!/bin/sh# Example showing how task arrays workrender input$SGE_TASK_ID |
The input file rendered will be the one corresponding to what the task ID is for each task created. So, for example, if you wanted to run the script render.job 4 times, processing the files input2, input4, input6, and input8, you would enter:
qsub -t 2-8:2 render.jobrender.sh would then be run 4 times, each with the default allocation of resources, with the input file corresponding to the basename + index number.
Exit status
Every process, and therefore every job, has an exit status. If the job completed normally then the exit status is that of the computation process. However, if the job does not complete normally then a value of 128 is added to the exit status of the command. If the command exited due to receiving a signal then the value of the signal is added to 128. This would be common for jobs running in the all.q queue when a job is evicted. A TERM signal is sent to a job when it is evicted. The numerical value of the TERM signal is 15 so the exit status of the job would be 128 + 15 = 143. Note that in some cases a TERM signal is not sufficient to remove a job and a follow up KILL signal will have to be sent. The job exit status would then be 128 + 9 = 137. Another case where a job will exit with status 143 is when memory limits are hit. So if your job has an exit status of 143 and it was not running in the all.q queue then it probably hit the memory limit. This can be further confirmed by examining the accounting record of the job with qacct.